UNIPOWER Guardian FMP25.48 Rectifiers
Alpine Power Systems' experienced technical support & sales team is here to assist your needs:
The UNIPOWER Guardian FMP25.48 52 amp rectifier incorporates resonant technology to reduce component stresses, providing increased system reliability and a best-in-class efficiency.
On this page:
The UNIPOWER Guardian FMP25.48 52 amp rectifier incorporates resonant technology to reduce component stresses, providing increased system reliability and a best-in-class efficiency. The rectifier features a wide input operating voltage range to maximize power availability within demanding utility power environments. Alpine Power Systems is an approved distributor of UNIPOWER products. Guardian FMP25.48 Rectifiers have a three year warranty.
These compact 52 amp rectifiers support up to 12.5kW in a 1RU 23” shelf. A wide variety of distribution options are available to provide the maximum system flexibility for a wide range of communications applications that demand efficiency, reliability, and flexibility including wireless base stations, remote switches, and broadband access.
Guardian FMP25.48 Features & Options:
Power density of up to 27W/in³
Rugged input voltage range
Thermal protection
Hot-swappable
92.5% typical efficiency
International standards compliance
Guardian FMP25.48 Features & Benefits:
High efficiency (>96% typical efficiency) and energy saving
Leading power density of up to 21.5W/in³
Rugged input voltage range
Thermal protection
Hot-swappable
International standards compliance
Guardian FMP25.48 Specifications:
Input:
Voltage: Operating Range: 85-275VAC. Permitted variation: 85-300VAC (L-PE and N-PE <250VAC)
Current:
<12.6A @ 240VAC
<17.2A @ 110VAC
Frequency: 47-63Hz
Power Factor: >0.99 at >25% load
Fuse: Two 25A fast blow (L & N)
Output:
Voltage Rating: 46-57.6VDC
Power:
2500W at ≥180VAC
1400W at 110VAC
1007W at 85VAC
Current: 48V Nominal, 53.5V Float
52.1A at ≥180VAC, 46.7A at ≥180VAC
29.2A at 110VAC, 26.2A at 110VAC
21.0A at 85VAC, 18.8A at 85VAC
Derating: 15.7W/Vin from 180-85Vin
Efficiency: >92.5%
Tolerance: Vout ±1.0%
Transient Response: ±5% at load variation 10-90% or 90-10% 20ms recovery
Load Sharing: <5% of nominal current
Ripple: <100mV p-p (BW 20 MHz)
Psophometric: <2mV, according to CCITT norms
Standards:
Inrush Current: ETSI ETS 300 132-1
Harmonics: EN61000-3-2
EMC:
ETSI EN300 386 V.1.3.2
EN61000-6-1, EN61000-6-2
EN61000-6-3, EN61000-6-4
EN55024 performance criterion A
EN55022 Class B
Telcordia NEBS GR1089
Environmental:
Storage: ETSI EN300 019-2-1
Transport: ETSI EN300 019-2-2
Operation: ETSI EN300 019-2-3
Damp Heat: IEC60068-2-78
MIL-STD-810D section 507.2
Earthquake: GR 63 Core Zone 4
Mechanical:
Dimensions, inches (mm): 4.2 W x 14.0 D x 1.6 H (107 W x 355 D x 41 H)
Weight: 4.6lbs. (2.1kg)
Cooling: Fan-cooled, speed controlled
Insulation:
4.25kVDC primary-secondary
2.12kVDC primary-ground
0.2kVDC secondary-ground
Enclosure: IP20
Mounting:
19in/23in x 1U subrack
Up to 4/5 modules
General:
Protection:
Short circuit
Automatic current/power limiting
Input/output overvoltage
Thermal
Alarms:
Fan failure
Short circuit/arcing protection
High temperature/output voltage
Low output voltage
Input voltage out of range
Low fan speed (warning)
Internal communication failure
LED Indicators:
Green: AC normal operation
Yellow steady: Low fan speed, High temperature
Yellow flashing: Comms. failure
Red: Module alarm / shutdown
Audible Noise (nominal input)
<45dBA @ ≤25°C (50% load)
<60dBA (100% load)
Operating Temperature:
-40°C to +75°C up to 2000m
Reduced spec -40°C to -20°C
Derated output power from 55°C linear derating to 75°C
For 3000m altitude derated by 5°C
Storage Temperature: -60°C to +85°C
MTBF @ 25°C (without fan): >273,000 hours to MIL-HDBK-217F-2
Alpine Power Systems is a value-added reseller of UNIPOWER products. Alpine can provide DC Power System services on all UNIPOWER products including engineering, installation, preventative maintenance, monitoring and recycling. Since 1963, working with Alpine Power gives you the Ultimate Advantage. Call our inside sales group at 877-993-8855 for assistance.
Manufacturer
See below for documentation relating to this product line that is available to download. To download this documentation, please click on the desired document you’d like to download and fill out the required form information fields. You will be able to view and download the documents upon completion of the download form.
Find UNIPOWER Guardian FMP25.48 Rectifiers in the following product categories:
Manufacturer