OmniOn Power Remote Radio Head Power
Alpine Power Systems' experienced technical support & sales team is here to assist your needs:
Our Remote Radio Head Power uses line-drop compensation (LDC) to improve radio powering.
On this page:
Our Remote Radio Head Power uses line-drop compensation (LDC) to improve radio powering. It is a 1RU shelf that provides up to 12 LDC circuits for safe and efficient powering of remote radio heads. Each shelf can accommodate up to four modules, each capable of driving three load cables. By elevating the voltage used to drive the cable, the inherent line drop can be tuned out, allowing the user to achieve lower operating costs by reducing the line losses. Conversely, smaller cables may be used to power similar loads using the compensator. Each shelf can be operated as a stand-alone solution but can also be uplinked over the RS-485 data bus through the RJ-45 connection on the rear of the shelf. This uplink allows each shelf to interface a Pulsar Plus controller (commonly used in our Infinity power systems) allowing local access, alarming and control of each circuit in every shelf, as well as remote interface over the controller LAN connection.
Applications
- CATV Headend
- Central Office
- DAS
- Small Cell
- Wireless Base Station
Manufacturer
Lower line losses, reducing operating expense.
Run similar loads using smaller cables, reducing cable expense.
In retrofit applications, use existing cable to power higher power loads.
Extend battery runtime by up to 35%.
Uplink to master controller for remote access over LAN.
See below for documentation relating to this product line that is available to download. To download this documentation, please click on the desired document you’d like to download and fill out the required form information fields. You will be able to view and download the documents upon completion of the download form.
Find OmniOn Power Remote Radio Head Power in the following product categories:
Manufacturer
