HBL VentPro Nickel-Cadmium Batteries
Alpine Power Systems' experienced technical support & sales team is here to assist your needs:
Next-generation valve-regulated pocket plate batteries with ultra-low maintenance requirements.
On this page:
HBL VentPro batteries combine rugged nickel-cadmium pocket plate technology with more than 95% gas recombination efficiency. Designed for industrial standby applications, VentPro batteries require no water additions during normal use when operated according to HBL’s recommended conditions.
Available in medium-discharge HVM and long-discharge HVL configurations, the VentPro range provides capacities from 7 Ah to 1,680 Ah. This extensive selection allows batteries to be closely matched to the application while reducing the potential need for parallel strings.
Alpine Power Systems can evaluate your application, select the appropriate VentPro configuration, and support the complete battery system throughout its operating life.
Next-Generation Valve-Regulated Ni-Cd Technology
VentPro is HBL’s next-generation valve-regulated nickel-cadmium battery range. It improves upon first-generation valve-regulated pocket plate technology with enhanced discharge performance, greater gas recombination efficiency, and ultra-low maintenance requirements.
The VentPro separator system facilitates the recombination of gases produced during charging. With gas recombination efficiency exceeding 95%, water loss is significantly reduced and routine water additions are not required under recommended operating conditions.
VentPro batteries are designed to comply with IEC 62259 and are certified by Intertek.
Key Benefits
More than 95% gas recombination efficiency
No water additions required under recommended operating conditions
More than 20 years of expected life at 68°F (20°C) in standby float applications
More than 90% capacity available after charging at 1.42 V per cell for 15 hours at 0.1 C5 A
Improved discharge performance
Strong performance at temperatures below 68°F (20°C)
Wide capacity range from 7 Ah to 1,680 Ah
Medium-discharge and long-discharge configurations
129 standard cell models across the complete range
Broad selection of intermediate capacities for more precise battery sizing
Potential to eliminate parallel battery strings in many applications
Rugged nickel-cadmium pocket plate construction
No risk of sudden-death failure
Minimal preventive maintenance requirements
Competitive total cost of ownership
VentPro Battery Ranges
HVM Medium-Discharge Batteries
HVM batteries are designed for medium and shorter-duration discharges requiring up to three hours of backup time.
Capacity range from 7 Ah to 1,340 Ah
63 standard cell models
Suitable for medium-rate and shorter-duration standby applications
Broad selection of intermediate capacities supports more precise battery sizing
Available in individual cells and selected multi-cell blocks
HVM batteries are appropriate for applications requiring higher discharge currents over shorter backup periods.
HVL Long-Discharge Batteries
HVL batteries are designed for applications requiring more than three hours of backup time.
Capacity range from 15 Ah to 1,680 Ah
66 standard cell models
Optimized for extended standby durations
Wide capacity range can reduce the need for parallel strings
Suitable for continuous industrial backup and long-duration emergency power
HVL batteries are appropriate for applications requiring sustained power over longer discharge periods.
Choosing Between HVM and HVL
The correct VentPro range depends on the required load, backup time, end-of-discharge voltage, operating temperature, charging system, and available installation space.
Choose HVM for medium-rate and shorter-duration applications requiring up to three hours of backup.
Choose HVL for long-duration applications requiring more than three hours of backup.
Battery selection should be based on the complete discharge profile rather than ampere-hour capacity alone. Alpine’s application specialists can review your requirements and recommend the appropriate VentPro range, capacity, number of cells, and rack arrangement.
Product Specifications
Battery chemistry: Valve-regulated nickel-cadmium
Product technology: Pocket plate with partial gas recombination
Product range: HBL VentPro
Available cell types: HVM medium-discharge and HVL long-discharge
Nominal voltage: 1.2 V per cell
Overall capacity range: 7 Ah to 1,680 Ah
HVM capacity range: 7 Ah to 1,340 Ah
HVL capacity range: 15 Ah to 1,680 Ah
Gas recombination efficiency: More than 95%
Expected standby float life: More than 20 years at 68°F (20°C)
Recommended operating range for no water addition: -4°F to 104°F (-20°C to 40°C), at 1.42 V per cell with temperature compensation
Recommended float voltage: 1.39 to 1.42 V per cell
Recommended boost voltage: 1.45 V per cell
Recommended single-level charging voltage: 1.42 V per cell
Container: Fusion-welded translucent polypropylene
Plate construction: Double-perforated steel pocket plates
Separator: Special polypropylene fibrous recombination system
Vent: Self-resealing, flame-arresting low-pressure vent cap
Standards: Designed to comply with IEC 62259
Certification: Intertek certified
Available condition: Filled and charged or filled and discharged
Optional equipment: Powder-coated mild-steel battery racks
Applications
HBL VentPro batteries are designed for industrial applications where reliability, long service life, and minimal maintenance are critical.
Typical applications include:
Oil and gas facilities
Electric utilities
Switching substations
Emergency lighting
Uninterruptible power supply systems
Fire alarm systems
Signaling systems
Industrial control systems
Critical infrastructure
Remote or difficult-to-access installations
VentPro can be particularly valuable at installations where routine battery access is limited or reducing maintenance demands is a priority.
Why Choose Alpine Power Systems?
Alpine Power Systems provides industrial battery expertise throughout the complete system lifecycle.
Application review and battery sizing
Battery and charger system engineering
Replacement battery system design
Battery racks and accessories
Installation and commissioning
Preventive maintenance
Battery testing and inspections
Charger evaluations
Nationwide field service
Battery recycling and disposal coordination
With nationwide capabilities and decades of critical power experience, Alpine helps customers select, deploy, and maintain reliable battery systems for essential operations.
Applications
- Emergency Lighting
- Generator Starting
- Oil & Gas
- Utilities & Switchgear
Technologies
- Nickel Cadmium (NiCd)
Manufacturer
See below for documentation relating to this product line that is available to download. To download this documentation, please click on the desired document you’d like to download and fill out the required form information fields. You will be able to view and download the documents upon completion of the download form.
Find HBL VentPro Nickel-Cadmium Batteries in the following product categories:
Manufacturer
