Emerson Edco PC642 Series
Alpine Power Systems' experienced technical support & sales team is here to assist your needs:
The Edco PC642 surge suppressor is a two-pair (four-wire) module implementing three-stage hybrid technology.
On this page:
The Edco PC642 surge suppressor is a two-pair (four-wire) module implementing three-stage hybrid technology. This module addresses over-voltage transients with gas tubes and silicon avalanche components. In addition, sneak and fault currents are mitigated with resettable fuses (PTCs). The PTCs increase resistance in several orders of magnitude when over-currents exceed safe levels and resume a normal state when over-currents are removed. The ability to self-restore in this manner significantly increases suppressor performance and survivability.
The Edco PC642 card edge module is gold-plated, double-sided, and is designed to mate with the Edco PCB1B-WKEY gold-plated female terminal connector. When snapped together, the data circuits “pass through” the protector in a serial fashion from the four “Field Side” terminals to the four “Electronics Side” terminals. Terminals 1 or 10 of the Edco PCB1B must be attached to Building-Approved Ground per Edco Technical Bulletin #2015.
Features and Benefits:
Three-stage hybrid protection
Sneak/fault current protection
Resettable fusing – PTCs
Fast response time
Requires Edco PCB1B-WKEY mounting base
5 year warranty
Installs easily with plug-in design.
See below for documentation relating to this product line that is available to download. To download this documentation, please click on the desired document you’d like to download and fill out the required form information fields. You will be able to view and download the documents upon completion of the download form.
Find Emerson Edco PC642 Series in the following product categories: