Eagle Eye - AC Load Banks

Eagle Eye's AC Load Banks are the smallest AC load banks in the industry that offer unmatched capacities with rugged durability. Each load bank is fully self-contained and designed for portable AC load testing that can easily withstand harsh testing environments. Our patent-pending resistor design and assembly make it possible to achieve smaller portable load banks than any one in the industry. The resistors are built for durability and backed by a two year warranty. AC load bank testing can provide predictive failure analysis of backup power systems in any industry. Optional features allow for complete load bank customization for any application.

The AC Load Bank series offers several standard models for continuous load. These models are designed with the most common applications in mind. Full specification sheets on these units are located in the downloads section, located on the right hand of your screen. All load banks come standard with durable finishing, ten foot cables, lifting handles, stainless steel exterior fasteners in a rugged construction frame and a housed in a hard-carrying case.

Every AC Load Bank is easy-to-use with a digital LED display operator control panel. Red and green lights indicate air flow and over-temperature. Straightforward individual fan switches, load step switches, and master load switches make the unit user-friendly. Safety features are equipped on every AC Load Bank for fast acting, branch circuit fuse protection and sensors to prevent overheating and current overload. AC Load banks are used for indoor-use only.

Technical Specs:

Ratings:

LB-30-208-3-1: 30 kW at 208 VAC, 3 Phase, 50/60 Hz, 83.3 A per phase
LB-60-208-3-5: 60 kW at 208 VAC, 3 Phase, 50/60 Hz, 166.5 A per phase
LB-100-208-3-5: 100 kW at 208 VAC, 3 Phase, 120 VAC L-N, 60 Hz, 278 A per phase
LB-100-MV-12.5:100 kW at 480 and 240 VAC, 3 Phase, 60 Hz, 120/241 A per phase
LB-72-200-3-9-400: 72 kW at 200 VAC, 3 Phase, 400 Hz, 115 V L-N, 208 A per phase
LB-75-200-3-5-400: 75 kW, 94 kVA at 200 VAC, 3 Phase, 400 Hz, 217 A per phase
LB-100-200-3-5-400: 100 kW, at 200 VAC, 3 Phase, 400 Hz, 289 A per phase
LB-200-3-5-400: 72 kW at 200 VAC, 3 Phase, 400 Hz, 115 V L-N, 208 A per phase
LB-200-3-5-400: 75 kW, 94 kVA at 200 VAC, 3 Phase, 400 Hz, 217 A per phase
LB-100-MV-12.5: 100 kW at 480 and 240 VAC, 3 Phase, 60 Hz, 120/241 A per phase

Display:

3-Line LCD Standard (Optional Shark Meter available for standard models)
2-Line LCD for all 400 Hz Models

Safety Features:

  • Fast acting branch circuit fuse protection on all 3 phases of all load steps
  • Fused 120 V control circuit
  • Air pressure switch to prevent load from being applied if loss of cooling air is detected
  • Over-temperature sensor automatically removes load if an over-temperature condition is detected
  • Blower Motor circuit is protected by current overload protection
  • Operator warning and caution statements are located on appropriate access panels and doors

Control Power:

110-120 VAC, 1 Phase, 50/60 Hertz, required for control circuit operation. Line cord provided.

 

We use cookies to make sure you get the best experience on our website. If you continue without changing your settings, you’re agreeing to receive all cookies on the Alpine Power Systems website.

Privacy Policy

TOP