Alber BDS-40 Battery Monitoring and Diagnostic System

The BDS-40, especially designed and optimized to monitor UPS batteries in cabinets, continuously monitors all critical battery parameters, automatically performs periodic resistance tests to verify the operating integrity of the connected battery, and greatly improves the reliability of your DC power system.

Easy to Install
Designed and optimized for UPS battery cabinets, the BDS-40 is the perfect choice. With the monitor mounted on top of the cabinet and custom cables with each connection point identified to battery, installation is quick and easy.

Easy to Configure
Each BDS-40 unit monitors all batteries in one cabinet. Two different units are available. The Base Unit is the central point where power and communication connections are made. Each additional battery cabinet in the system then uses a Plus Unit, which transfers data to the Base Unit for alarm and data storage. Each Base Unit can manage up to five Plus Units, for a total of six battery cabinets. Choose an internal network card and/or a dial-up modem as standard.

Easy to Use
Albér’s BDS-40 makes hard-to-interpret data easily understandable. Programmed thresholds flag problem batteries by making bar graphs turn red, triggering alarms and distributing alerts via email as soon as abnormal conditions are detected. The report has built-in decision support that analyzes data and provides suggestions for the best cause of action.

Early Warning for Battery Problems
The BDS-40 uses a patented internal DC resistance test method that bypasses the limitations of AC based impedance testing. Like an ultrasound for a battery, Albér technology lets you "look inside" and assess the battery’s true state of health. It tests the condition of each module by performing a proactive resistance test - the most reliable indicator of battery performance. Because it's important to detect deterioration at an early stage to prevent catastrophic failures when dealing with 12 volt sealed batteries, measurement technology is the most important consideration when selecting a monitor. Other battery monitors’ internal ohmic readings become inconsistent as the UPS load varies because of variations in AC ripple on the battery. The Albér DC resistance test method is not affected by ripple and thus provides data that is repeatable and reflects the true condition of the battery.

Optimizing Useful Battery Life
Sealed batteries are also sensitive to temperature and float voltage settings, and battery life can be extended by optimizing these. The BDS-40 monitors these conditions and continuously provides you with information that allows for considerable cost savings by optimizing useful battery life. Instead of waiting for an inevitable failure or replacing batteries prematurely, you can continue to use your battery longer and with confidence by knowing its true condition.

Real Time Data Capture

● Cell Voltage

● Cell Resisitance

● String Voltage

● Discharge Current (Note: An optional current transducer is required. Transducer accuracy affects overall

current reading accuracy.)

● Float Current (Note: An optional current transducer is required.)

We use cookies to make sure you get the best experience on our website. If you continue without changing your settings, you’re agreeing to receive all cookies on the Alpine Power Systems website.

Privacy Policy

TOP