Deka Unigy I 12AVR100ET Batteries
Alpine Power Systems' experienced technical support & sales team is here to assist your needs:
Deka Unigy I 12AVR100ET sealed lead-acid batteries are available as AVR (absorbed valve regulated) and GVR (gel valve regulated) technology for virtually any application demand.
On this page:
Deka Unigy I 12AVR100ET sealed lead-acid batteries are available as AVR (absorbed valve regulated) and GVR (gel valve regulated) technology for virtually any application demand. Both are UL recognized components and are made in the U.S.A. with individually tank-formed plates for optimized uniformity of cell-to-cell voltages.
Deka Unigy I 12AVR100ET General Specifications:
Nominal Voltage:Â 12-Volt/96 ampere-hours @ 8hr rate to 1.75 final volts/cell
Positive Plate:Â Pure lead, low-calcium, high-tin alloy
Negative Plate:Â Lead calcium alloy
Post Seal:Â Epoxy-sealed
Terminal:Â 1/4" x 20 brass insert
Container:Â Flame-retardant, polypropylene - UL94 V0/>28% L.O.I.
Safety Vent:Â Low positive pressure, self-sealing w/ flame arrestor
Float Voltage:Â 2.27 volts per cell +/- 0.01 vpc (Range: 13.56 to 13.68 volts per 6-cell unit)
Design Life: 10 years in float applications at 77ºF/25°C
Length:Â 511 mm, 20.12 in
Width:Â 110 mm, 4.33 in
Height:Â 240 mm, 9.44 in
Weight:Â 34.0 kg, 75 lbs
Manufacturer
See below for documentation relating to this product line that is available to download. To download this documentation, please click on the desired document you’d like to download and fill out the required form information fields. You will be able to view and download the documents upon completion of the download form.
This product is part of the Deka Unigy I Batteries family.
Find Deka Unigy I 12AVR100ET Batteries in the following product categories:
Manufacturer
