FIAMM FHT Batteries

FIAMM FHT batteries have been design to withstand harsh environmental conditions. Special grid alloy and superior grids design grant 7 years design life at 95°F. FHT range has front terminal design ideal for installation on cabinet 19” and 23”; it allows easy access for maintenance reducing the installation footprint and maximizing the energy density. FHT uses proven VRLA technology with 99% internal recombination efficiency, is non-spillable and maintenance free therefore requires no topping up of electrolyte during its float-life.
FHT range is compliant with the highest recognised international standard, it is non-hazardous for air / sea / rail / road transportation and it is 100% recyclable. FHT has a self-discharge rate less than 2% per month, guaranteeing long shelf-life. Alpine Power Systems is an approved value-added reseller of FIAMM battery products.

FIAMM FHT Battery Specifications:

• Superior alloy grid, designed to resist corrosion and provide short recharge time

• Leak resistant post seal, threaded female M8 terminals with high conductivity and maximum torque resistance

• One-way safety relief valves allow gas to escape and prevent the ingress of oxygen and flame arrestors prevent sparks or flames entering the battery

• Flame retardant ABS/PC plastic to IEC 707 and UL94 FV0 (LOI greater than 28%) to guarantee superior thermal stability

• Installation in any orientation (excluding permanently inverted)

FIAMM FHT Battery Technology:

FIAMM FHT Batteries use AGM (Absorbed Glass Mat) technology. The electrolyte is absorbed in fiberglass seperators with 99% internal gas recombination efficiency. Blocs are grants non-spillable and maintenance free therefore requires no topping up of electrolyte during its whole life. Low self-discharge allows 6 months of shelf life.

FIAMM FHT Battery Electrical Characteristics:

• Float Voltage: 2.23 V/cell at 95°F

• Boost Voltage: 2.35 V/cell

• Float Voltage Compensation with Temperature: -1.39 mV/cell/°F Self-Discharge at 68°F: < 2% /month

FIAMM FHT Battery Applications:

• Telecom

FIAMM FHT Battery Standards:

• IEC 60896 Part 21 - VRLA methods of testing

• IEC 60896 Part 22 - VRLA requirements

• BS 6290 Part 4 - specifications for VRLA classification BS633 / UL 94 V0 / IEC 707 FV0

• Eurobat >12 years

FIAMM FHT Battery Certifications:

• ISO 9001 Quality Management System

• ISO 14001 Environmental Management System

• ISO 45001 Workplace Safety & Health

FIAMM FHT Battery Accessories:

• RVS (Remote Venting System) for applications which require remote gassing

• Rack for battery installation (standard and anti-seismic)

• Cabinets for battery installation (including electrical protections and disconnections)

• Battery monitoring systems