Skip to content

AMETEK Lithium Compatible UPS Systems

Alpine Power Systems' experienced technical support & sales team is here to assist your needs:

AMETEK Solidstate Controls has a new Lithium Iron Phosphate solution. This system has the same robust reliability you trust but now you have a choice to use Lead-Acid or Lithium Iron Phosphate batteries for your industrial applications.

AMETEK Lithium Compatible UPS Systems

On this page:

AMETEK Solidstate Controls has a new Lithium Iron Phosphate solution. This system has the same robust reliability you trust but now you have a choice to use Lead-Acid or Lithium Iron Phosphate batteries for your industrial applications.

AMETEK Lithium Compatible UPS Specifications:

Single Phase: 5 – 100 kVA*
Three Phase: 10 – 160 kVA*
* Additional Sizes Available, Contact Factory

Battery Charger/Rectifier Specifications:

AC Input

  • Nominal Voltage: 208, 380, 415, 480, 600 VAC (3Ø)

  • Input Range: ± 10% (- 15% without discharging)

  • Frequency: 50 or 60 Hz ± 5%

DC Output

  • DC Bus Voltage(s): 110, 120, 240 VDC

  • Regulation: ± 1%

  • Ripple Voltage: < 2% with battery connected

  • Capacity: Sized to recharge a 30 minute battery to 95% of its rated capacity within 8 hours, while simultaneously supplying power to a fully loaded inverter

  • Float: ± 5% Adjustability

Inverter Specifications:

DC Input

  • Nominal Voltage: 110 V/55 (99-135 VDC)

  • Range: 120 V/60 (105-140 VDC), 240 V/120 (210-280 VDC)

AC Output

  • Single Phase Ratings: 5-100 kVA

  • Three Phase kVA Ratings: 10-160 kVA

  • Power Factor: 0.8 or 1.0

  • Single Phase: 120, 220, 240 VAC

  • Three Phase: 120/208, 220/380, 277/480 VAC4

  • Regulation: ± 1 %

  • Voltage Adjustment: ± 5 %

  • Frequency: 50 or 60 Hz; + 0.1%

  • Crest Factor: 3:1

  • Total Harmonic: 100% linear load < 3%

  • Distortion (THD): 100% non-linear load < 5%

  • Transient Response: ± 5% (0-100% load)

  • Recovery Time: < 50 millisecond to ± 1%

  • Inverter Overload Capacity: 100% - continuous 125% - 10 minutes 150% - 1 minute

Same Maximum Performance

  • True on-line, double conversion UPS

  • Provides continuous, clean, regulated power for critical loads

  • Fiber optic cables used for better control and communication

  • High Power IGBT semiconductors and digital control

  • Large, full color LCD touchscreen display

Alpine Power Systems is a value-added reseller of AMETEK products. Alpine can provide UPS System services on all AMETEK products including engineering, installation, preventative maintenance, monitoring and recycling. Alpine’s Certified Technicians are equipped to maximize the performance and efficiency of your UPS system. Contact us today for pricing and technical inquiries.

See below for documentation relating to this product line that is available to download. To download this documentation, please click on the desired document you’d like to download and fill out the required form information fields. You will be able to view and download the documents upon completion of the download form.

PDF Document
ametek-lithium-compatible-ups-systems-brochure.pdf

ISO Certifications

Alpine Power Systems is proud to have three ISO Certifications that have been awarded to us after comprehensive audits completed by third-party, independent experts. Alpine must validate that all ISO processes are being followed through yearly follow up inspections.

Certification Certification Certification

Contact Us

Alpine Power Systems' experienced technical support & sales team are here to assist your needs.